Designed to handle the demands of small- to medium-sized business NAS environments and increased workloads for SoHo (Small Office and Home Office) customers, the WD Red Plus SATA III 3.5″ Internal NAS HDD in 2TB capacity is optimized for archiving, sharing, and RAID array rebuilding on systems using ZFS and other file systems in NAS arrays with 1-8 bays.
With a SATA III 6 Gb/s interface and a 128MB cache, this drive ensures smooth and uninterrupted data transfers with a sustained rate of up to 175 MB/s. Its high levels of reliability are backed by features such as 600,000 load/unload cycles, <1 in 1014 non-recoverable read errors per bits read, error recovery controls, and a 1 million hours MTBF (Mean Time Between Failures) rating.
The WD Red Plus HDD also incorporates noise and vibration protection, ensuring quiet operation and reducing wear and tear on the drive. WD’s NASware 3.0 technology increases system compatibility, making it easy to integrate WD Red Plus drives into your existing network infrastructure.
Whether you need reliable storage for your small- to medium-sized business NAS environment or a high-performance drive for your SoHo setup, the WD Red Plus SATA III 3.5″ Internal NAS HDD in 2TB capacity delivers the performance, reliability, and compatibility you need for your data-intensive tasks.
WD Plus Internal HDD Specs
| Storage Capacity | 2 TB SATA III (6 Gb/s) 3.5″ HDD (5400 rpm) |
| Read Speed | Maximum: 175 MB/s |
| Write Speed | Maximum: 175 MB/s |
| Buffer | 128 MB |
HDD Specs
| Noise Level | 27.0 dB (Active) 23.0 dB (Idle) |
Reliability / Data Integrity
| Encryption | None |
| Endurance (Total Bytes Written) | 180 TB |
| Load/Unload Cycles | 600,000 |
| Mean Time Between Failures (MTBF) | 1.0 Million Hours |
| Non-Recoverable Read Errors per Bits Read | 1 in 1014 |
Electrical
| Power Draw | 4.8 W (Active) 3.1 W (Idle) 0.4 W (Standby) |
| Supported Voltage | 5 VDC, 12 VDC |
| Current | 1.75 A at 12 VDC |
