Sale!

Cooler Master Elite V3 400W Power Supply

Original price was: ₹3,499.00.Current price is: ₹2,999.00.

-14%

Provide power to your everyday PC build with the Elite V3 400W Power Supply from Cooler Master. Capable of delivering up to 400W power output over a single +12V rail, this ATX 12V power supply comes with a non-modular design, meaning all its sleeved cables are attached to the device.

Free Delivery in Kochi, Aluva & Angamaly 

  • 1 Year Free Service Warranty
  • 1-year Warranty on Parts
  • Life Time Tech Support

 

The Elite V3 400W PSU features one PCIe connector, six SATA connectors, three peripheral connectors, and a floppy connector, while a 120mm fan with an intelligent fan controller is designated to keep the power supply cool and quiet. The PSU has a 75% efficiency rating.

75% Efficiency

The efficiency of your power supply unit is important because it directly affects you system’s performance and your power bill. The efficiency rating does not reflect the quality or reliability of a PSU; it only reflects the unit’s ability to move power from the wall to your components. The higher a PSU’s efficiency is, the lower the total amount of power it needs to power your system. The new Elite V3 series has a guaranteed typical efficiency of 75%.

Active Power Factor Correction

A power supply unit works by taking power directly from the wall or other fixed power source, converting it to the correct output required by the connected components, and then distributing that power to the components. If any part of this process is interrupted or executed poorly, the connected components and the PSU itself could be damaged. Active PFC uses a circuit to correct the power factor, which helps to reduce total harmonics, correct AC input voltage, and increase overall efficiency output.

Higher Temperature Resistance

The Elite V3 has a maximum operating temperature of 104°F/40°C. This higher operating temperature allows you to power your system safely in warmer environments without having to worry about your system overheating or shutting off unexpectedly. The higher heat resistance also reduces temperature based wear, increasing the lifespan of the unit by a noticeable amount.

Cooler Master Elite V3 400W Specs

Connectivity

Total Connectors1 x 20+4-Pin ATX Motherboard
1 x 4+4-Pin EPS CPU
1 x 6+2-Pin PCIe
6 x 15-Pin SATA
3 x 4-Pin Peripheral / Molex
1 x 4-Pin Floppy
Cable DesignSleeved
PCIe Connector Distances25.6″ / 650 mm
SATA Connector Distances29.5″ / 750 mm
Peripheral Connector Distances34.3″ / 870 mm
Floppy Connector Distances34.3″ / 870 mm
ATX Connector Distance19.7″ / 500 mm
EPS Connector Distances21.7″ / 550 mm

Electrical

Total Wattage400 W
Number of +12 V Rails1
Combined Power for +12 V360 W
Max Load for +12 V30 A
Combined Power for +3.3/+5 V100 W
Max Load for +3.3 V14 A
Max Load for +5 V14 A
Max Power for +5 Vsb12.5 W
Max Load for +5 Vsb2.5 A
Max Power for -12 V3.6 W
Max Load for -12 V0.3 A
AC Input Power100 to 240 VAC, 50 / 60 Hz at 4 to 8 A

General

Efficiency RatingNone
Active Power Factor CorrectionYes
Efficiency75%
Hold up Time10 ms at 100% Load
Power-Good Signal100 to 500 ms

Cooling

Fan Size120 mm
Bearing TypeSleeve

Environmental

Operating Temperature42 to 72°F / 10 to 40°C

Physical

Form FactorATX
ComplianceATX 12 V v2.31
ProtectionOver-Power Protection, Over-Temperature Protection, Over-Voltage Protection, Short-Circuit Protection
CertificationsBSMI, CE, FCC, TUV
*as per Manufacturer
Mean Time Between Failures (MTBF)100,000 Hours
Dimensions5.91 x 5.51 x 3.39″ / 150 x 140 x 86 mm

Additional information

Brands

Watts

400W